Lithium Batteries
Description
A-size 3.6 V lithium thionyl chloride non-rechargeable battery with polarized cable/plug assembly for the TCM-x Current Meter and MAT-1 Data Logger.
Includes
1 x “A” Size Lithium Battery
PN: BAT1
Battery Replacement Tool Kit for TCM-1, TCM-3, MAT-1
Description
This kit includes the recommended tools to replace the battery in the the TCM-1 and TCM-3 Current Meters and the MAT-1 Data Logger. The kit includes replacement battery. Additional batteries are available separately.
Includes
1 x Special Tool
1 x “A” Size Lithium Battery
1 x 3/32″ Hex Driver
1 x Battery Installation Instructions
Documentation
MAT-1, TCM-1, TCM-3 Battery Replacement Instructions
PN: BRTK1
Battery Replacement Tool Kit for TCM-4
Description
This kit includes the recommended tools to replace the battery in the TCM-4 Current Meter. The kit includes the first replacement battery. Additional batteries are available separately.
Includes
1 x 3/32″ Hex Driver
1 x #2 Phillips Screwdriver
1 x 3/4″ x 8″ Pusher Dowel
1 x Replacement “A” Size Lithium Battery
1 x Battery Installation Instructions
Documentation
TCM-4 Battery Replacement Instructions
PN: BRTK2
MAT-1 End Cap
Description
Spare PVC end cap for the MAT-1 Data Logger. Includes pre-lubricated O-ring.
Includes
1 x MAT-1 End Cap
1 x Dash 909 EPDM 70 Durometer O-ring
PN: ENDCP1
MAT-1Ti End Cap
Description
Spare Titanium end cap for the MAT-1 Data Logger. Includes pre-lubricated O-ring.
Includes
1 x MAT-1Ti End Cap
1 x Dash 910 Buna 90 Durometer O-ring
PN: MAT1Ti
TCM-1 End Cap
Description
Spare PVC end cap for the TCM-1 Current Meter. Includes pre-lubricated O-ring and 12 inch (30 cm) lanyard.
Includes
1 x MAT-1 End Cap with lanyard
1 x Dash 909 EPDM 70 Durometer O-ring
PN: ENDCP2
TCM-4 End Cap
Description
Spare PVC end cap for the TCM-4 (shallow water) Current Meter. Includes pre-lubricated O-ring and 12 inch (30 cm) lanyard.
Includes
1 x TCM-4 End Cap with lanyard
1 x Dash 909 EPDM 70 Durometer O-ring
PN: ENDCP4
TCM-3 End Cap
Description
Spare Titanium end cap for the TCM-3 Current Meter. Includes one pre-lubricated O-ring and 12 inch (30 cm) lanyard.
Includes
1 x TCM-3 End Cap with lanyard
1 x Dash 910 Buna 90 Durometer O-ring
PN: ENDCP3
Replacement O-rings for PVC End Caps
Description
10-Pack of O-rings for the TCM-1, TCM-4 x & MAT-1 PVC logger. Includes O-ring lubricant.
Includes
10 x Dash 909 EPDM 90 Durometer O-rings
1 x Packet of O-ring Lubricant (6 grams)
PN:ORING1
Replacement O-rings for Titanium End Caps
Description
10-Pack of O-rings for the MAT-1Ti Data Logger and TCM-3 Current Meter. Includes O-ring lubricant.
Includes
10 x Dash 910 Buna 90 Durometer O-rings
1 x Packet of O-ring Lubricant (6 grams)
PN: ORING2
Replacement Float for TCM-1
Description
Replacement float for use with TCM-1.
Includes
1 x Float
PN: TCM1FLT
TCM-1 Inversion Kit
Description
Inversion kit for the TCM-1 Current Meter. Required to use the meter in an “inverted” or hanging orientation.
Includes
2 x Silicon Bronze Ballast Washers
1 x Silicon Bronze 5/16-18 x 1-1/4″ Bolt
Documentation
Application Note: Deploying the TCM-1 Current Meter in an Inverted Orientation
PN: TCMINVK
TCM-1 Low-Velocity Ballast Washer
Description
Replacement low speed ballast washer for the TCM-1.
Includes
1 x Silicon Bronze Ballast Washer
1 x Silicon Bronze 5/16-18 x 3/4″ Bolt
PN: BLWSH1